46cm, 75cm and 90cm Ku Band Satellite Dish
Very strong, steel dish with power coating. Does not include LNB or mount.

1m Ku Band Satellite Dish
Very strong, steel dish with powder coating. Includes LNB arm stays. Does not include LNB or mount.

2.4m, 3m and 3.7m C Band Mesh Satellite Dish
Petal design that ships in a small box. Black mesh petals. Aluminium frame. Powder coated. Available in polar and pole mount. Does not include LNB or mount.

1.8m and 2.4m C Band Solid Petal Satellite Dish
Petal design that ships in a small box. Grey steel petals. Steel box frame for ground mount. Powder coated. Available in polar, pole and ground mount. Ground mount pictured. Does not include LNB or mount.

Eave, Roof and Wall mounts for 65cm and 1m dishes
Strong, thick walled steel pipe. Galvanised. Includes bolts, tek screws and instructions.

Dish Mover
Suits dish up to 1.2m. Any Topfield receiver will operate it. Does not need extra cables. Just hang on standard mount and refit dish.
E-brochure here..

Linear Actuator
24 inch linear actuator for rotating large polar mount dishes like the 2.4m or 3m mesh and solid petal dishes. Will operate with the TF5000CIP direct or use Dish Positioner below for other receivers. Requires extra cables to be run to actuator.

Dish Positioner
Power supply plus positioner to drive Linear Actuator. Has remote control. TF5000CIP does not need this unit to control linear actuator. Other receivers need this unit. Requires extra cables to be run to actuator.

User Guide SAP-2000 (pdf 4.67 mb)

Portable Mount
Portable mount for 65cm dish. Powder coated and aluminium finish. Legs fold up. Three legs for stability. Can be pinned to gound for extra stability. Especially suitable for caravan or motorhome, but also used when landlord does not want dish on house.

Ku and C Band LNB
Ku Band LNB - flat body, small head. Available in both L.O. 11300 and L.O. 10750.
Ku Band universal LNB.
C Band LNB, with scalar ring.
C Band Dual Oscillator LNB - This LNB has two L.O. (local oscillators) running together (5150, 5750). This means both vertical and horizontal signals are running on one cable simultaneously. This allows many receivers to run on one cable using splitters or drop taps. Each receiver can access all transponders without affecting the other receivers. Requires some setup in receiver. More here...

Twin and Triple LNB Plate
Twin Plate - Aluminium plate designed to hold two flat body, small head Ku Band LNBs. This allows reception of Optus B1 and Optus B3 from a 65cm dish without moving the dish.
Triple Plate - Aluminium plate designed to hold three flat body, small head Ku Band LNBs. This allows reception of Optus B1, Optus C1 and Optus B3 from a 1m dish without moving the dish.